2Symmetra
LX Start Up Guide
Turn Off All Power
1. Check that the AC utility power to the UPS is OFF.
2. Check that the input circuit breaker on the UPS is OFF.
3. Check that the system enable switch is OFF.
Install the Symmetra LX
• Install the Symmetra LX UPS and accompanying modules. Refer to the Symmetra LX UPS
Physical Installation Guide.
• Install the appropriate Extended Run Cabinets and accompanying modules. Refer to the
Symmetra LX Extended Run Cabinet Physical Installation Guide.
220/230/240 V
200/208 V
To Next Page
Loading...
