20
XTX Second Stage Regulator Maintenance Manual
Table 3 - Recommended Lubricants & Cleaners
LUBRICANT / CLEANER APPLICATION SOURCE
Christo-Lube
®
MCG-111
(Lubricant)
All ‘O’ Ring seals Apeks Marine Equipment Ltd
PN AP1495, or
Lubrication Technologies
310 Morton Street
Jackson, OH 45640, USA
(800) 477-8704
PerFluoroLube® 20/1 (Lubricant) All ‘O’ Ring seals Lubrication Technologies
310 Morton Street
Jackson
OH 45640, USA
(800) 477-8704
Biox
(Cleaning agent)
Biological immersion uid for reusable stain-
less steel and brass parts.
Solent Divers Ltd
122-128 Lake Rd, Portsmouth,
Hants, PO1 4HH
White distilled vinegar (100 gr.)
(Cleaning agent)
Acid bath for reusable stainless steel and
brass parts.
“Household” grade
Liquid dishwashing detergent di-
luted with warm water
(Cleaning agent)
Degreaser for brass and stainless steel
parts; general cleaning solution for plastic
and rubber
“Household” grade
CAUTION: Silicone rubber requires no lubrication or preservative treatment. DO NOT
apply grease or spray to silicone rubber parts (eg. Diaphragm, Exhaust Valves.) Doing
so may cause a chemical breakdown and premature deterioration of the material.
CAUTION: Do not use muriatic acid for the cleaning of any parts. Even if strongly diluted,
muriatic acid can harm chrome plating and may leave a residue that is harmful to ‘O’
Ring seals and other parts
To Next Page
Loading...
