Need help?Do you have a question about the Apeks XTX200 and is the answer not in the manual?
General| Type | Regulator |
|---|---|
| Series | XTX |
| Model | XTX200 |
| First Stage | DST |
| Second Stage | XTX200 |
| Ports | 4 LP, 2 HP |
| Environmental Protection | Yes |
| Cold Water Suitable | Yes |
| Hose Connections | 3/8" UNF |
| Environmental Sealing | Yes |
| Adjustable Breathing Resistance | Yes |
| First Stage Material | Chrome Plated Brass |
| Second Stage Material | Composite |
| Nitrox Compatibility | Yes, up to 40% O2 |
| Intermediate Pressure | 9.0-10.0 bar |
| Material | Chrome Plated Brass |
| Maximum Working Pressure | 300 bar (4351 psi) |
Specific requirements for using EAN outside European Economic Community.
Regulations for EAN use within EEC countries, referencing EN standards.
How to configure hose routing for left or right-handed use.
Explanation of the diver-controllable venturi system for airflow adjustment.
Description of the 'DRY' environmental sealing system for first stages.
Explanation of the heat exchanger for preventing second stage freeze-up.
Detailed steps for fitting the hose to lightweight second stages.
Detailed steps for fitting hoses to all types of first stages.
Procedures for attaching the first stage to Yoke cylinder valves.
Procedures for attaching the first stage to DIN cylinder valves.
Information on using a DIN to Yoke converter for regulator connection.
A step-by-step checklist for inspecting the regulator before diving.
Guidance on using the regulator while submerged, including adjustments.
Precautions and recommendations for diving in cold water conditions.
Detailed steps for detaching the regulator from Yoke cylinder valves.
Detailed steps for detaching the regulator from DIN cylinder valves.
Routine cleaning, inspection, and preparation for storage of the regulator.
Requirements and importance of professional servicing by authorized dealers.
Instructions for disassembling and reassembling the swivel joint assembly.
Terms and conditions of the limited lifetime warranty for original purchasers.
Guidance on how to return the regulator for service or warranty claims.
To Next Page
