To Next PageTo Next Page
Need help?Do you have a question about the Apeks Black Ice and is the answer not in the manual?
General| Type | Backplate and Wing System |
|---|---|
| Material | Armorshield Cordura |
| Series | Black Ice |
| Color | Black |
| Weight System | Integrated weight system compatible |
Provides essential instructions for fitting, adjustment, inspection, and care of the BC, emphasizing safety.
A log to record dates, dealer names, city, state, country, and technician initials for service history.
Covers the product throughout its useful life against defects in materials and workmanship, subject to conditions.
Details how products with significant use are replaced based on a percentage factor of their condition and usage duration.
Outlines conditions not covered by warranty, such as improper use, neglect, unauthorized repairs, and cosmetic damage.
Allows cylinder to be close and vertical for comfortable posture without pulling backwards.
Offers three size adjustments to customize BC fit for different diving environments and exposure suits.
Allows shoulder straps to be fitted into two positions to shorten or lengthen BC for different diving needs.
Fits across sternum to keep shoulder straps from slipping, ensuring a secure fit. Can be removed.
Features a simple quick-release clip with web-slides for easy adjustment via waistband D-rings.
Allows quick and easy adjustment for securing cylinders of all standard sizes without wetting.
Features two pockets holding up to 16 lbs. releasable weight and two rear trim pockets for 5 lbs. non-releasable weight.
Includes weather-proven Powerline inflator and streamlined, low profile flat valves for air release.
Provides additional secure storage space for dive accessories like lights and masks.
Optional back pad held by hook and loop attachments, can be removed.
Two grommet holes on the left side pocket designed to accommodate an optional knife.
Step-by-step guide on how to connect the Medium Pressure (MP) inflator hose to the regulator first stage.
Identifies and labels the parts of the GripLock cylinder band system for adjustment and securing.
Instructions on how to re-thread the GripLock cylinder band through its bail if it has been removed.
Guide on how to adjust the GripLock cylinder band for proper fit and security on the cylinder.
Steps for securely fastening the GripLock cylinder band to the cylinder, including valve strap usage.
Guides the user through donning the BC by connecting torso straps for a comfortable fit.
Instructions for connecting and tightening the waist buckle, and adjusting the chest strap for comfortable support.
Details how to remount the waistband onto different grommet attachment points for length adjustment.
Explains how to remount shoulder straps onto two grommet attachment points for length adjustment.
Covers adjusting the chest strap for comfort and how to remove it from the BC.
Describes the SureLock II system for securing and jettisoning weight pouches for ascent control.
Details the capacity of SureLock II weight pouches and trim pockets, recommending low-profile block weights.
Provides a chart detailing releasable and trim weight capacities for different BC sizes.
Recommends loading equal amounts of weight per pouch and using four separate block weights for optimal balance.
Illustrates how to place block weights within the pouch compartments for proper filling and securing.
Advises on loading soft weights correctly to ensure the locking mechanism engages properly, noting pre-formed pouches.
Step-by-step guide for sliding the pouch into the holster and engaging the SureLock II buckle with the BC receptacle.
Explains how to pull the release handle to jettison weight pouches independently for ascent control.
Details the use of fixed pockets for non-releasable weight, recommending rectangular blocks and cautioning against primary ballast use.
How to inflate the BC using the Powerline inflator's power button with medium pressure air.
Steps for inflating the BC using the oral inflator mouthpiece and button.
Using the oral inflator button to vent air from the BC, most effective for initial descent.
Using the dump valve by pulling down on the power inflator to vent air from the BC.
How to use the flat valves on the shoulder and rear sides to quickly dump air from the BC bladder.
Describes the two grommet holes designed for attaching specialty BC knives.
Details the drop-down utility pocket for storing dive accessories like lights and masks securely.
Information on mounting twin cylinders to the BC using the Twin Tank Kit and important safety considerations.
A comprehensive list of checks for the power inflator, valves, cylinder band, and weight pouches before diving.
Guidelines for cleaning and maintaining the BC to extend its service life, including rinsing and drying.
Instructions on how to properly store the BC, including inflation level, location, and temperature limits.
