Using your Induction Hob
To start cooking
1. Touch the ON/OFF control for 3 secnds.
After power on, the buzzer beeps once, all displays
show “ – ”, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
4. Select the power level by pressing the “+”key (E) or “-”key(D)
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
3 . Accordin g t o th e heatin g zon e where th e p an i s placed , sele ct a relevan t zon e
sele
ct ke y b y pressin g ke y (A).Th e symbol 0 . selecte d will st ay full y it.
5. Th e powe r level
will start at 5. Pressin g th e “+”will coun t u p th e powe r level s
fro m 5 t o 9 i n numerical order. Pressin g th e “-”ke y will tak e th e powe r straigh t
fro m 9 t o 0.
• If yo u don’ t choose a heat settin g withi n 1 minute , th e inductio n ho b will
.
To Next Page
Loading...