When recording is interrupted:
1. The TF card may be full, please format it.
2. Please check if Parking Guard or Motion Detection is turned on. We
recommend turning these two functions off while driving, because they are
used for parking monitoring.
When the TF card is full after using it for a while:
Although the dash cam has the Loop Recording function, not all recorded
are automatically overwritten due to the G-sensor Protection function. Also
the videos recorded under the Motion Detection and Parking Guard will also
be locked. These locked videos will not be deleted automatically.
To save more memory space, we suggest to set the Loop Recording to 3
MINS and the Gravity Sensor to LOW.
When your 128 GB TF card cannot be read by the dash cam:
It must be formatted to a FAT32 64KB file system first on your computer.
Also format it on your computer or dash cam before use.
When the camera can't be turned on after being used for a
while:
1. Please confirm whether it is charged properly: Check if the indicator light
on the car charger is on when it is charging; Check if the car charger is
working properly and if the blue indicator light on the dash cam is on.
2. Remove the TF card and reset the camera. Connect the camera and
computer with the original USB cable to see if the camera can be
charged and turned on.
Troubleshooting
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
EN
To Next Page
Loading...
