10
Wireless connection
Pair the camera with 2.4G Wi-Fi. ( Camera does not support 5G
band Wi-Fi. )
Click “Smart wireless mode” after making sure that you use Wi-Fi on
your phone and both the camera and your phone are in good network
condition. Click “Red light is blinking” after you hearing a “Di-di”
sound from the camera as red light blinking.
Enter your Wi-Fi password and click “Next”.
Choose your current location. Turn up phone volume to maximum and
place your phone near the camera. Click “Next”.
Your phone will make sound wave configuration with the camera by
emitting beeping sound. You will hear camera broadcast a
“ding-dong” sound and say “camera is ready”. The indicator flashes
in green. Camera is successfully added and you can name your
camera.
Click “Try now” and the camera will make a panorama shot of taking
15 photos which create a long navigation picture. Each photo
bookmarks a position. Camera will turn to the bookmark position as
you tap on the navigation picture. Or you can skip it.
·
·
·
·
·
To Next Page
Loading...