LED lights indicate the battery status. Only one LED
light is on and flashes means low power. Use the
provided AC Adapter to charge your Projector.
Otherwise the Projector will automatically shut down
when the power is too low.
M4 Projector shall be charged with the equipped
charger. When the LED Indicator light on in White and
flashes, the Projector is currently charging. Each LED
light stands for 25% power, when all the 4 LED lights
are on, the Projector is fully charged.
Fully charging the battery of M4 Projector needs 3-5
hours before first use. It will last about 2 hours once it’s
fully charged.
Note: 1.
2.
3.
6
To Next Page
Loading...
