Apera Instruments Salt20 User Manual

5
7.3 Parameter setting notes
a) Select salinity unit(P1):
Optional units: ppt – mg/L, factory default is ppt.
b) Restore to factory default:
Select Yes to restore the calibration to the theoretical values and parameter
setting to original values. When meter’s calibration or measurement performs
abnormally, this function can be adopted so the meter goes back to factory
default setting and then users can conduct calibration or take measurements
again.
8. Technical Specifications
Salinity
Range
0 – 10.00 ppt
Resolution
0.01 ppt
Accuracy
±1% F.S
Calibration points
1 point auto calibration
Automatic Temp.
Compensation
0-50˚C
Temp.
Range
0-50˚C
Resolution
0.1˚C
Accuracy
±0.5˚C

Apera Instruments Salt20 Specifications

General

Brand	Apera Instruments
Model	Salt20
Category	Test Equipment
Language	English