Compatible models for PH60F-E replacement probe:
PH60F, PH60, PH60S, PC60
PH5F, PH5, PH5S, PC5
How to replace the probe?
Screw off the probe ring, unplug the probe, plug in the new replacement probe (pay
attention to the probe’s position), and screw on the probe ring.
The liquid inside the probe cap is 3M KCL storage solution (SKU: AI1107). It helps keep
the spear pH sensor’s accuracy. The sensor must be always stored in this storage
solution when not in use. If it gets contaminated, replace it with new ones. (Using other
brands’ storage solution could cause potential damage to the probe).
Go to
www.aperainst.de to watch some tutorial videos.
We warrant this electrode to be free from defects in material and workmanship and
agree to repair or replace free of charge, at option of APERA INSTRUMENTS (Europe) GmbH any malfunctioned or
damaged product attributable to responsibility of APERA INSTRUMENTS (Europe) GmbH for a period of six-month.
This warranty does not apply to defects resulting from actions such as misuse (violation of the instructions in this
manual or operations in the manner not specified in this manual), improper maintenance, or unauthorized repairs.
Warranty period is the time limit to provide free service for the products purchased by customers, not the service life of
the probe.
APERA INSTRUMENTS (Europe) GmbH | Wilhelm-Muthmann-Straße 18, 42329 Wuppertal, Germany
Tel. +49 202 51988998 |
info@aperainst.de | www.aperainst.de
Compatible models for PH60F-E replacement probe:
PH60F, PH60, PH60S, PC60
PH5F, PH5, PH5S, PC5
How to replace the probe?
Screw off the probe ring, unplug the probe, plug in the new replacement probe (pay
attention to the probe’s position), and screw on the probe ring.
The liquid inside the probe cap is 3M KCL storage solution (SKU: AI1107). It helps keep
the spear pH sensor’s accuracy. The sensor must be always stored in this storage
solution when not in use. If it gets contaminated, replace it with new ones. (Using other
brands’ storage solution could cause potential damage to the probe)
Go to www.aperainst.de to watch some tutorial videos.
We warrant this electrode to be free from defects in material and workmanship and agree to repair or replace free of
charge, at option of APERA INSTRUMENTS (Europe) GmbH any malfunctioned or damaged product attributable to
responsibility of APERA INSTRUMENTS (Europe) GmbH for a period of six-month. This warranty does not apply to
defects resulting from actions such as misuse (violation of the instructions in this manual or operations in the manner
not specified in this manual), improper maintenance, or unauthorized repairs. Warranty period is the time limit to provide
free service for the products purchased by customers, not the service life of the probe.
APERA INSTRUMENTS (Europe) GmbH | Wilhelm-Muthmann-Straße 18, 42329 Wuppertal, Germany
Tel. +49 202 51988998 |
info@aperainst.de | www.aperainst.de
To Next Page
Need help?
General
