Need help?Do you have a question about the Apera EC60 and is the answer not in the manual?
General| Brand | Apera |
|---|---|
| Model | EC60 |
| Category | Measuring Instruments |
| Language | English |
Differentiate button press durations for tester functions.
Controls power, backlight, and measurement mode.
Switches between measurement parameters and selects settings.
Initiates calibration, confirms readings, and unlocks values.
Switch to conductivity mode and rinse probe.
Pour calibration solutions into bottles.
Long press CAL to enter calibration mode.
Dip probe, stir, wait for stable reading, confirm.
Use second buffer if first calibration is inaccurate.
Rinse probe, dip, stir, wait for stable reading.
Conversion factors for TDS/Salinity from conductivity.
Supported calibration standards and number of points.
Factory calibration, recalibration needs, solution replacement.
Default and adjustable temp. compensation settings.
Wrong buffer or damaged electrode, check solutions/electrode.
CAL key pressed prematurely, wait for stable reading.
Lists parameters P1-P7, their content, and defaults.
Procedure to enter, select, and confirm parameters.
Details on Auto Lock, Backlight, and Factory Default settings.
Icons (L, M, H) indicating calibration points.
Icons for stable measurement, auto-lock, and low voltage.
Two-color backlight modes and auto power off function.
Lists compatible replacement probe model numbers.
To Next Page
