Need help?Do you have a question about the Apera EC400S and is the answer not in the manual?
General| Temperature Range | 0 to 50°C (32 to 122°F) |
|---|---|
| Temperature Resolution | 0.1°C (0.1°F) |
| ATC | Yes |
| Display | LCD |
| IP Rating | IP67 |
| Weight | 100g |
| Data Logging | No |
| Connectivity | No |
| Type | Conductivity Meter |
| Conductivity Accuracy | ±1% F.S. |
| TDS Accuracy | ±1% FS |
| Resolution | 1 µS/cm |
| Temperature Accuracy | ±0.5 °C |
| Calibration | 1-point |
| Power | 4 AAA batteries |
Details about the 201T-S 3-in-1 combination pH electrode.
Explains calibration modes, buffer solutions, and frequency.
Step-by-step guide for performing a 3-point pH calibration.
Instructions for taking pH measurements after calibration.
How to perform ORP (mV) measurements with the meter.
Details about the 2301T-S conductivity electrode and its constants.
Explains conductivity calibration solutions, frequency, and methods.
Step-by-step guide for performing conductivity calibration.
Instructions for taking conductivity measurements.
To Next Page
