Apera EC60 User Manual

8
8. Icons and Functions
① Calibration points indication:
② Stable Measurement:
③ Reading value Auto. Lock: HOLD
④ Self-Diagnostic Information: Er1, Er2
⑤ Low-Voltage warning: flashes, reminder of battery replacement
⑥ Two-Color backlight:
Blue—Measurement Mode; Green—Calibration Mode;
⑦ Auto. Power off in 8 minutes if no operation.
9. Probe Replacement
Screw off the probe ring, unplug the probe, plug in the new replacement probe (pay attention to the
probe’s position), and screw on the probe ring. The model numbers of replacement probes that are
compatible with EC60 is:
 EC60-E (Conductivity probe)
10. Warranty
We warrant this instrument to be free from defects in material and workmanship and agree to
repair or replace free of charge, at option of APERA INSTRUMENTS (Europe) GmbH, any
malfunctioned or damaged product attributable to responsibility of APERA INSTRUMENTS
(Europe) GmbH for a period of two years from the delivery (a six-month limited warranty applies
to probes). This warranty does not apply to defects resulting from actions such as misuse (violation
of the instructions in this manual or operations in the manner not specified in this manual),
improper maintenance, or unauthorized repairs. Warranty period is the time limit to provide free
service for the products purchased by customers, not the service life of the tester or probe.
APERA INSTRUMENTS (Europe) GmbH
Wilhelm-Muthmann-Straße 15
42329 Wuppertal
Germany
Contact: info@aperainst.de
Website: www.aperainst.de
Tel. +49 202 51988998

Apera EC60 Specifications

General

Brand	Apera
Model	EC60
Category	Measuring Instruments
Language	English