12
APEX DIGITAL
AD-703
1. If the TV has S-VIDEO input, please connect the unit and the TV with S-VIDEO cord (not supplied).
You do not have to connect it to VIDEO. S-VIDEO will ensure clearer image.
2.You have to set the unit according to the TV to be connected.
• If the system of the TV is PAL, push SYSTEM and select PAL.
• If the system of the TV is NTSC, push SYSTEM and select NTSC.(NTSC is American standard.)
• If the system of the TV is AUTO (multi-system), push SYSTEM and select AUTO.
• Connect the unit to a wide-screen TV. Set the “TV DISPLAY” to “16:9 WIDE” in the function
setting column.
• Connect the unit to an ordinary TV. Set the “TV DISPLAY” to “4:3/PS” or “4:3/LB” in the function
setting column.
Preparation Before Operation
CONNECTIONS
Before preparing this unit for operation, make sure all equipments are turned off.
The unit has several types of output modes like A/V output, S-VIDEO output, digital signal output
(COAXIAL). You may select as needed.
CONNECTED TO A TV
Be sure your TV is on the Video Input
channel before you press Setup to select
your settings.
You will see the Setup menu on your TV
screen.
To Next Page
Loading...
