APG SPDS12S - Specifications

DYNAMIC PROCESSORS 4
TECHNICAL SPECIFICATIONS
ELECTRICAL:
Input: Balanced, 20 KOhms
XLR3, pin 1 ground
Output: Balanced, 100 Ohms
XLR3, pin 1 ground
Noise: -94 dBu (22 Hz, 22 Hz)
HPD: < 0.01 % (4 dBu, 1 kHz)
Frequency response: Tailored to optimize frequency
response of DS series speakers.
Input Level:
Nominal: +4dBu
Maximum: +20dBu
Output Level:
Nominal: +4dBu
Maximum: +26dBu
Impedance:
Input: 20 kOhms balanced
Output: 100 Ohms balanced
SUBWOOFER CROSSOVER FREQUENCY:
High section cut-off (without sub)
SPDS15 / SPDS15S / SPDS15SR 80 Hz (24dB/Octave)
SPDS8 / SPDS12/ SPDS12S 100 Hz (24dB/Octave)
Connectors: XLR 3 pin
Consumption: 220/240Vac 15VA
MECHANICAL:
Dimensions: 482,6 mm x 270 mm x 44,45 mm
Gross Weight: 3 kg
Finish: Black Epoxy