Need help?Do you have a question about the Apogee Mini-Me and is the answer not in the manual?
Inputs| analog input line level | –10 dBu to +4 dBu |
|---|---|
| microphone amp gain range | 12-65 dB |
| instrument input impedance | 2.2 MΩ |
Outputs| headphone output power | 0.3 Watts/Channel RMS |
|---|---|
| AES/EBU sample rates | 44.1-96 kHz |
| AES/EBU resolutions | 16, 20, 24-bit |
Digital Interfaces| USB audio resolutions | up to 24-bit |
|---|---|
| USB audio sample rates | up to 48 kHz |
| dynamic range | 105 dB |
Power| power input | 6-16 V DC, 5.5 W |
|---|---|
| power supply output | 12 V DC |
| USB power | Derived from interface |
Weight and Dimensions| size | 5.4 in x 9.8 in x 1.5 in |
|---|---|
| weight | 2 lb |
| frequency response | 20 Hz – 20 kHz ±0.2 dB @ 44.1 kHz Fs |
Safety precautions covering electrical shock, moisture, power voltage, and FCC compliance.
Details on mic/instrument preamps, compressor/limiter, and sample rate capabilities.
Step-by-step instructions for initial setup and connection of the Mini Me.
Setup and adjustment for Line, Microphone, and Instrument inputs.
Explanation of Push-IT circuit, sidechain response, and compression curve selection.
Instructions for adjusting Push-IT compressor ratios and microphone preamp gain structure.
Detailed specifications for audio inputs, outputs, and digital interfaces.
To Next Page
