Apogee Rosetta 800 Connection Guide

ApogeeApogeeConnnects : Rosetta 800 - MiniDAC - Digi 002, 001
Analog Outputs
(p/n DA8-IFC)
Analog Inputs
(p/n AD8-IFC)
Hardware Connections
Analog Outs
(WE-XX-5.0)
Notes
1) The 002’s ADAT I/O supports sample rates up to 48 kHz.
2) In the Pro Tools software, under Hardware Setup, set Clock Source to ADAT.
3) In Pro Tools, select inputs ADAT 1-8 to receive signals from the Rosetta 800’s analog inputs;
select outputs ADAT 1-8 to send signals to the Rosetta’s analog outputs.
4) In Pro Tools, select the S/PDIF output to send signals to the MiniDAC’s analog outputs.
Hardware Settings
Select desired
sample rate
Analog 24-Bit ADAT
S/PDIF CX
S/PDIF
WE-RR-1.0
Optical (Toslink)
Cables

Apogee Rosetta 800 Specifications

General

Converter Type	A/D and D/A
Number of Channels	8
Sample Rates	44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Analog Inputs	8 x XLR
Analog Outputs	8 x XLR
Digital Inputs	AES/EBU, ADAT
Digital Outputs	AES/EBU, ADAT
Word Clock	In/Out
Dynamic Range	117 dB D/A
Clock I/O	Word Clock In/Out
Power Supply	Internal
Dimensions	19 x 1.75 inches (rackmount)
Weight	12 lbs