Apollo 3300 IB 1978 - Page 44

OPERATING
INSTRUCTIONS
Your
unit is
operated
totally
from the
control panel
on the
inside ceiling
assembly.
There
are two
controls
on the
control panel.
The temperature
con-
trol regulates
the on and
off temperature
setting
at which
the compressor
will
operate.
The second
control
called
a selector switch
regulates
the volume
of
air
that
your air
conditioning
unit will
be handling
throughout
the home.
There
are two
positions
on
the selector switch,
one of which
brings
on the
blower
or fan
only and
the second
of which allows
the
refrigerant
compressor
to operate
in conjunction
with the
blower.
Your Coleman
RV
air conditioning
unit incorporates
a unique return
air
damper
control
which regulates
the volume
of air
being circulated
in
the
home.
This means
you
have an infinite
control
measure
on the
air and
are not
required
to
operate
on positive
speed control
(high,
low, medium,
etc.) as
are
most
air conditioners.
Your
air conditioner
does
several things
related
to your
personal
comfort.
First,
the
blower assembly
recirculates air
throughout
the home
to
keep you
comfortable.
In
addition,
the air being
circulated
is completely
filtered while
the
unit is
in operation.
Your
Coleman RV
air conditioner
also
removes
ex-
cessive
heat
from the
air being
circulated
throughout
the
home.
This heat
is
transferred
into
the refrigerant
and subsequently
ejected
to the outdoors
on
top
of the
home.
The
unique
advantage
of the
Coleman RV
air conditioner
with
its mechanical
return
damper
arrangement
is
in humidity
control.
This unit
can
be operated
completely
as a
dehumidifier
by setting
the
control
panel
for maximum
cool-
ing
and minimum
airflow.
To
operate for air recirculation
only.
l.
Set the
temperature
control
to the
minimum
position
and
set the
selec-
tor switch
for
your choice
of low
to high
fan only
operation.
In
this
position
the
unit will
circulate
and
filter the
air throughout
the
coach
without
either
de-
humidifying
or cooling.
2.
Filtering
the air.
At any
time
the unit
is operated
with
the fan
in
operation,
whether
cooling
or on
recirculation
only,
the entire
air
stream
is be-
ing filtered.
3.
Cooling Operation.
To operate
the
unit as a
complete
air
conditioner
on
cooling,
set the
selector
switch to
the cooling
detent
and select
your
pre-
ferable
airflow,
anywhere
from
maximum
to minimum.
Then
turn
the
forty-ve