four
DRIVER
AND PASSENGER SEATS
— The driver and passenger
seats
have numerous
adjustments to provide
you with maximum comfort. Both
seats have
backward/forward adjustments, raise
and lower, swivel and have
adjustable
arm rests. For additional comfort the seats also recline.
To make a forward/backward
adjustment,
find
the two
levers located
under
the forward center position of the seat. Move the smaller, top iever to the left
and slide the seat to the desired position. To swivel
the seat,
depress the larger,
lower
lever and turn. Simply lift or
lower
the
arrnrests
as desired. To recline or
raise the seat back,
locate the knob at thejunction of the seat and back. Then
simply
dial the desired
position. To make a vertical adjustment,
depress the
swivel release, hold in the down position and slowly pull straight up on the
seat. After the seat has traveled W’, release swivel. Continue lifting the seat
approximately another 3/4” until swivel lock engages the next higher position.
To continue the
adjustment, repeat the operation.
After satisfactory height
has been found, loosen fasteners on clamp ring, check for swivel
and re-
engagement of swivel lock.
Both
seats are equipped with seat belts. To lengthen belt
to fit, turn the buckle
perpendicular
to the belt, and pull to desired length. To shorten, pull loose
end
of belt.
CA
UTION:
Move seat
forward
before
swiveling.
To Next Page
Loading...