Apollo 51000-600 User Manual

51000-600 / 51000-601
Wireless Combination Smoke, Heat and
Carbon Monoxide Detector
Installation Guide
ATTENTION: This manual should be read prior to use and retained for further
information.
1. GENERAL INFORMATION
The Wireless Combination Smoke, Heat and Carbon Monoxide Detector is a
2xCR123A battery powered wireless detector intended for use with a compatible
wireless alarm system. The detector consists of a photoelectric smoke sensor,
thermistor heat sensor and electrochemical carbon monoxide sensor coupled to a
wireless transmitter, which communicates with the control panel. When fire or
carbon monoxide is detected, the detector sounds a loud local alarm and the built-
in transmitter sends a signal to the control panel. The Wireless Combination
Smoke, Heat and Carbon Monoxide Detector contains an integrated fixed 41°F
(5°C) temperature freeze sensor that will send a warning signal based on
temperature detected. This detector is designed to provide protection with 70-foot
spacing capability. The detector can send alarm, tamper and battery condition
messages to the system’s receiver. Refer to the wireless system’s instruction for the
maximum number of transmitters that can be supported.
The detector has an operational life of 10 years. After 10 years of operation the
detector will provide audio visual trouble indication and must be replaced.
WARNING: This product is intended for use in ordinary indoor residential areas. It
is not designed to measure compliance with Occupational Safety & Health
Administration (OSHA) commercial and industrial standards.

Apollo 51000-600 Specifications

General

Brand	Apollo
Model	51000-600
Category	Smoke Alarm
Language	English

Summary

General Information

Detector Overview

Detector Front

Details the front view of the detector and its features like sensors and buttons.

Detector Back

Details the back view of the detector, including model information and compliance labels.

Detector Mounting Base

Explains the structure and features of the detector's mounting base.

Contents of Box

Operation and Status Indicators

Detector Status LED and Sounder Modes

Explains the meaning of LED flashes and sounder patterns for different statuses.

Detector Dirty Feature

Describes the detector's behavior when sensor sensitivity is affected by dirt.

Detector End of Life

Informs users about the detector's 10-year lifespan and the need for replacement.

Low Battery Detection

Details how the detector indicates a low battery condition.

Battery Installation and Replacement

First Detector Use

Covers initial setup steps, including removing the battery pull tab.

Battery Replacement

Provides step-by-step instructions for replacing batteries.

Programming to Control Panel

Mounting the Detector

Recommended Locations for Smoke and Heat Detectors

Guides placement for optimal smoke and heat detection performance.

Recommended Locations for Carbon Monoxide Detectors

Guides placement for optimal carbon monoxide detection.

Mounting Procedure

Outlines the step-by-step process for securely mounting the detector.

Tamper Protection

Field Service Tests

Sensitivity Check

Method to verify the detector's sensitivity is within operational limits.

Smoke Alarm Test

Procedure to test the smoke alarm function by pressing the test button.

Smoke Alarm Functional Test

Tests smoke alarm functionality using canned smoke.

Heat Alarm Functional Test

Tests heat alarm functionality using a hair dryer.

CO Alarm Test

Procedure to test the carbon monoxide alarm function.

CO Alarm Functional Test

Tests carbon monoxide alarm functionality using CO test gas.

Post Testing

Actions to take after testing to ensure normal operation.

Maintenance

Cleaning

Instructions on how to clean the detector for optimal performance.

Fire Detection Information

Carbon Monoxide Gas and Detection

Specifications

Compatible RF Equipment

Model 51000-600 Compatibility

Lists compatible control unit for Model 51000-600.

Model 51000-601 Compatibility

Lists compatible control unit for Model 51000-601.

Regulatory Information