Apollo AAN-32 - User Manual

This manual contains confidential information and
may only be reproduced or distributed with the
written consent of Apollo Security Sales, Inc.
© 2011 Apollo Security Inc.
AAN-32 Hardware
Manual
Revision Date: 26 OCT 2011

Summary

IMPORTANT INFORMATION

Warnings and Precautions

Covers high voltage warnings and electro-static discharge (ESD) precautions for safe operation.

FCC Compliance Statement

Details the device's compliance with FCC rules and regulations for radio frequency emissions.

Part I Introduction

System Overview

Introduces the AAN-32 Access and Alarm Network Controller and its role in access control systems.

General Features

Lists the key capabilities and features of the AAN-32 controller.

Programming Host Connection

Explains how to connect the AAN-32 to a host PC for configuration and monitoring.

Part II Hardware Layout

Terminal Connectors and Layout

Details the location and function of various terminal connectors on the AAN-32 board.

DIP Switch Configuration

Explains the function and settings of the DIP switches for panel configuration.

Component Connectors

Describes specific connectors for memory, host interface, and device ports.

LED Indicators and Firmware

Details the AAN-32's LED indicators for status and explains firmware storage and upgrading.

Additional Installation Information

Provides general guidance for installing the AAN-32, including mounting hole details.

Part III System Wiring

Power and Grounding

Covers power supply requirements and essential grounding practices for system safety and integrity.

Host Communication Wiring

Explains serial and network connections for host communication.

ANI Network Modules

Details the hardware layout, DIP switches, and connectors for ANI-1 and ANI-100 network modules.

Field Device Communication

Describes connecting field devices using RS-485 communication lines.

Alarm Inputs

Explains the function and wiring of power fault and cabinet tamper alarm inputs.

Part IV Software Configuration Utilities

ANI-1;100 IP Programming

Guides IP address configuration for ANI-1 and ANI-100 using InitAAN utility.

ANI-100 Configuration Methods

Covers web page and Telnet methods for configuring the ANI-100, including communication setup.

Firmware Upgrading

Provides instructions for upgrading the AAN-32 controller's firmware using FlashAAN.

Part V Memory Capacity

Memory Capacity Guidelines

Offers guidelines for determining sufficient memory size for cardholders and events.

Part VI Specifications

AAN-32 Technical Specifications

Lists detailed technical specifications for the AAN-32, including power, communication, and dimensions.

Part VII Supplemental Figures

Supplemental Figures Overview

References various diagrams and illustrations for hardware, wiring, and grounding.

Part IX Revision History

Document Revision History

Details the history of changes and updates made to the AAN-32 Hardware Manual.

Apollo AAN-32 Specifications