Need help?Do you have a question about the Apollo AIM-4SL and is the answer not in the manual?
General| Brand | Apollo |
|---|---|
| Model | AIM-4SL |
| Category | Controller |
| Language | English |
Guidance on high voltage AC main power connection safety.
Procedures to prevent electro-static discharge (ESD) damage to sensitive components.
Statement regarding FCC rules compliance for digital devices.
General description of the AIM-4SL Downloadable Reader Interface module.
Lists the key capabilities and functionalities supported by the AIM-4SL.
Details the different operating modes and configuration options for the AIM-4SL.
Description of the terminal blocks for connecting power, readers, inputs, and outputs.
Explanation of DIP switches for setting communication address, baud rate, and input mode.
Details on device port communication driver socket and additional connectors.
Description of LEDs for monitoring panel function and diagnosing problems.
Information on the AIM-4SL firmware stored in re-programmable flash memory.
Details on the on-board memory for configuration and event data with backup power.
Information related to mounting the AIM-4SL, including mounting holes.
Guidelines for connecting and selecting a power supply for the AIM-4SL.
Importance of proper grounding for ESD protection, safety, and signal reference.
How the AIM-4SL communicates with controllers via serial connection.
Details on RS-485 bus configuration, signal ground, termination, and device wiring.
Instructions for connecting various types of card readers to the AIM-4SL.
Wiring for door contact, exit pushbutton, and auxiliary alarm inputs.
Wiring for door strikes and auxiliary outputs using internal and external relays.
Description of the single general alarm input and cabinet tamper switch.
Steps to verify and diagnose RS-485 communication problems.
Guidance for verifying reader functionality and diagnosing keypad errors.
Procedure for checking door contacts, exit pushbuttons, and auxiliary alarm inputs.
Methods for verifying the operation of internal and external output relays.
To Next Page
