19
1
2
Proceed in reverse: push the front stem
down to unlock the hook from the
locking ring. Then li the front stem up to a
vertical position.
Lower the collar all the way until it
comes to a stop at the base of the
goose neck. Then close the quick release
lever. Make sure the lever is tight enough so
the handlebar can’t move around inside the
front stem.
To unfold the scooter:
1
2
IF THE CLAMP IS BLOCKED AND
CANNOT BE LOWERED:
1. Lightly push the front stem forward to re-
lease pressure on the folding mechanism.
2. Loosen the screws of the locking lever.
3. You can also lubricate the contact surface
with a little WD-40 or similar.
HOW TO FIX THE LOOSENING OF
THE FOLDING MECHANISM:
The folding mechanism is likely to become
loose over time due to the force of having
a user pulling the handlebar. When this
happens, use the Allen key supplied to gently
tighten the 3 screws as shown in the photo
above (don’t tighten too strongly or you risk
damaging the mechanism). If the stem clamp
aer time isn't tightening or doesn't feel
secure when tight, please contact Customer
Support to ensure that the clamp is still safe
for usage.