WARNING
● If switch is left on the standby current will continue to flow.
It is possible that damage will occur from over discharge of the battery.
WARNING
● Do not miss the check before diving in order to prevent from serious injury.
● Move the main switch to off position.
● Confirm that all battery indicator lights are off.
Main switch OFF
● Lay the scooter down on a level surface.
● Pull and turn the pitch control dial knob to make adjustments
to the propeller angle.
● Push the dial back after speed selection.
● All apollo DPV: Confirm that pitch operation moves smoothly through the three stages.
● All apollo DPV: Recommended position is Pitch 2 or 3 because of law consumed power.
Acceleration purpose
(need more power for pulling a heavier person or weight - reduces battery life)
Standard purpose
(most efficient setting)
Low speed purpose
■STEP4 Turn off the main switch.
■STEP5 Using the variable pitch propeller.
Pitch selection
Lay the scooter down on a level surface
Pull the pitch dial
Choose the speed level
with pulling dial
(All apollo DPV)
17
To Next Page
Loading...
Need help?
General
