16
Push the two parts of the motor cable connector together, making sure that the
moulded arrows are aligned
Replace the rubber wheel nut caps & clip / cable tie the motor cable back along the
fork leg.
Reconnect the front V brake.
EC Declaration of Conformity
The equipment which accompanies this declaration is in conformity
with the following EU Directives:-
83/37/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EEC Electromagnetic Compatibility Directive
2001/95/EC General Product Safety Directive
2012/19/EU Waste Electrical and Electronic Equipment Directive
2006/66/EC Batteries Directive
Manufacturer:- EVERGRAND BICYCLE VIETNAM CO., LTD Block R1 & R2,
Street D6 & N11, Nam Tan Uyen Industrial Park, Khanh Binh Ward, Tan Uyen
Dist., Binh Duong Province
Represented in the EU by:- Halfords Plc, Redditch, B98 0DE.
A copy of the Technical file for this equipment is available from:- the EU
address above.
Description of Equipment
Halfords Apollo Metis 250 W Front Motor Drive System, 8.7Ah Li-Ion Battery
& Battery Charger