Apollo PHANTOM V3 User Manual

Setting up your scooter right is the single most import-
ant step to your safety.
Please note that this process is also available in video
format through our help centre. Visit apolloscooters.
co/support to view it.
We recommend having the following items ready
prior to starting the setup process:
• Box cutters or knife
• Stool or bench
• Air pump
• Strong friend
Open the box using the box cutter and fold open the
top. Inside you should see protective styrofoam along
with the following contents:
• Apollo Phantom V3 electric scooter
• Manual
• Charger and cable
• Hex key
• Tool kit
5
UNBOXING
Intro Unbox your scooter
Improper assembly of your Apollo scooter can cause
component or performance failure resulting in loss
of control, serious injury, or death. In the event of a
malfunction or any damage to any of the components
during set up of your scooter, please discontinue set
up immediately, do not ride the scooter, and contact
our support team through our help desk apollo-
scooters.co/support. If you are not sure you have the
experience, skills, and tools to correctly perform all
assembly steps in the manual and the assembly video at
apolloscooters.co/support, consult our support team
or a local electric scooter shop.
If any of these items are missing, please contact us
immediately via apolloscooters.co/support.
With the help of someone, remove the scooter from
the box and place it on a flat surface. We recommend
using a stool or bench as the wheels need to be able
to spin freely.
Carefully remove the protective material from the
scooter and set it aside. We suggest keeping both the
styrofoam and the box in case you need to ship your
scooter back to us. Otherwise recycle the materials
wherever possible.
WARNING

Apollo PHANTOM V3 Specifications

General

Brakes	Hydraulic disc brakes
Water Resistance	IP54
Tires	10-inch pneumatic
Lights	Front and rear LED lights
Max Load	120 kg
Weight	77 lbs (35 kg)