Apollo PHANTOM - Assembly and Setup Guide; Unboxing Your Apollo Phantom

4
ASSEMBLY & SET UP
Intro Unbox your scooter
Setting up your scooter right is the single
most important step to your safety.
Please note that this process is also avail-
able in video format through our help
centre. Visit support@fluidfreeride.com to
view it.
We recommend having the following items
ready prior to starting the setup process:
• Box cutters or knife
• Stool or bench
• Air pump
• Strong friend
Open the box using the box cutter and fold
open the top. Inside you should see pro-
tective styrofoam along with the following
contents:
• Apollo Phantom electric scooter
• Manual
• Charger and cable
• Toolkit
If any of these items are missing, please
contact us immediately.
With the help of your friend, remove the
scooter from the box and place it on a flat
surface. We recommend using a stool or
bench as the wheels need to be able to
spin freely. Carefully remove the protective
material from the scooter and set it aside.
We suggest keeping both the styrofoam
and the box in case you need to ship your
scooter back to us. Otherwise recycle the
materials wherever possible.
WARNING:
Incorrect assembly, mainte-
nance, or use of your Apollo
scooter can cause compo-
nent or performance failure,
loss of control, serious injury,
or death. Even if you’re an
experienced scooter rider,
you must read and under-
stand the entire manual and
any documentation provid-
ed for subcomponents or
accessories before riding.
If you are not sure you have
the experience, skills, and
tools to correctly perform all
assembly steps in the manual
and the assembly video at
apolloscooters.zendesk.
com, consult our support
team or a local electric
scooter shop.