User Guide and Instruction Manual
RS232 Connection – J6, J7
The user is responsible to determine if local laws and regulations permit audio recording.
AUX Power Connection – J11
Two RS232 ports are provided to connect external devices such as GPS.
The Recorder can be controlled remotely by an external device such as the GPS or control system
using RS485 half-duplex serial communications signals.
In addition to having audio channels with each camera connection, the recorder has two sources of
external audio. Connect the audio sources (microphone) to MIC 1 and MIC 2 as needed.
The Recorder has a 12 VDC output connector which provides power to external
devices up to 2A.
To Next Page
Loading...
Need help?
General