11
* 1: The reading maybe rolling ≦ 6 digits when the reading is close to full scale.
* 2: The reading maybe rolling ≦ 3 digits when the reading is close to full scale.
* 3: The response time is approximate 20 seconds.
* : Put a low resistor in the input terminal before turn the rotary function switch to resistor and continuity function
maybe cause a buzzer sound.
(4) Continuity
Built-in buzzer sound when measured resistance is less than 50Ω and sound off when measured resistance is
more than > 300Ω .
Between 50Ω to 300Ω the buzzer maybe sound or off either.
To Next Page
Loading...
