APPA 703 - Setup Sorting Standard Values

The default sorting standard value is the current value, and the
default tolerance is ±1.0%.
Setup Sorting Standard
To setup the sorting standard value, follow the steps below.
1. Press the SETUP button to enter the setup mode.
2. Press
△
and
△
button to setup the range of the standard
value. Then press the ENTER button to save the setup value
and enter the next step.
3. Press △ ,
△
,
△
and
△
button to setup the standard value.
Then press the ENTER button to save the setup value and
enter the next step.
4. Press
△
and
△
button to setup the tolerance value. Then
press the ENTER button to save the setup value and exit this
mode.
EN
703
19