Starting
and
stopping
the
Apple
lie
There are two ways to start Apple lie
programs-one
for
when
the
power
is
off,
the other
for
wilen the power is already on,
If
you have
installed two disk controller cards,
be
sure
to read
'Staning
From a
Drive in a Lower Slot.'
Starting with the power off
Here's a review
of
the
£lrst
sunup
method (the computer is off),
sometimes called a
cold
start:
1. Put a program disk in drive
1.
(Close the drive door, if
necessary.)
2. Switch
on
the monitor.
3.
Switch
on
the Apple lie.
Figure
2~8
Starting wtIen
fha
computer
Is
off
Chapter
2:
Starting
the
Apple
lie
To Next Page
Loading...
