Apple iMac G5 Power Supply, 17-inch User Manual

033-2498 Rev. C

iMac G5
Power Supply, 17-inch
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note: Online instructions are available at http://www.apple.com/support/doityourself/.
Tools Required
• Use the screwdriver provided, or a Phillips #2 screwdriver, preferably with a
magnetized tip
• Flat-blade screwdriver
• Screw tray or equivalent to hold the screws
Part Location

Apple iMac G5 Power Supply, 17-inch Specifications

General

Power Supply Type	Internal
Input Voltage	100-240V AC
Frequency	50-60 Hz
Model	iMac G5
Screen Size	17-inch

Summary

Tools and Preparation

Tools Required for Replacement

List of tools necessary for the power supply replacement procedure.

Power Supply Part Location

Identification of the power supply unit's location within the iMac G5.

Important Safety and Handling Information

Key considerations and warnings before starting the replacement process.

Ambient Light Sensor Handling

Handling of the ambient light sensor on the replacement power supply.

Ambient Light Sensor Identification

Identification method for the iMac G5 ambient light sensor feature.

Screw Color Warranty Caution

Warning regarding the color of removable screws to avoid voiding warranty.

Static Discharge Procedure

Instruction to ground oneself to discharge static electricity before working.

Safe Connector Disconnection Technique

Guidance on safely disconnecting cables by pulling the connector, not the wires.

Included Tool Details

Information about the included magnetized L-shaped Phillips screwdriver.

Opening the Computer

Removing the Power Supply

Installing the Replacement Power Supply

Closing the Computer