Apple IIe - Page 122

122 Apple Ile Users Handbook
When using the cassette LOAD, first make sure that the current
language is active (Applesoft or Integer BASIC). Position the tape
to the beginning of the program , type LOAD, and press return.
The cursor will disappear and after a few seconds the Apple will
beep . The beep indicates that LOAD has started. When the
second beep sounds, the LOAD will be finished. If an error
occurred , turn off the computer , turn it on , and try again.
In
the DOS LOAD , LOAD need only be entered with the
program name, and the return key pressed. If the indicated file
name is not present on the specified diskette, the FILE NOT
FOUND error will occur.
Example
LOAD
LOG
• Applesoft
o Integer
The LOG function returns the natural log of the argument.
Configuration
LOG (argument)
argument is a numeric constant or numeric expression greater
than
0. .
The natural
log is undefined for negative numbers.
Example
PRINT LOG (25)
3.21887583