Apple IIe - Page 142

142 Apple lie Users Handbook
If the array being recalled was dimensioned with more elements
than the stored array, the values in the recalled array may be in
the wrong order.
However, the recalled array may be dimensioned with more
elements than the stored array if only one final dimension is
larger. For example, if the stored array was dimensioned as
follows,
DIM A(10,10)
and
the recalled array was dimensioned as:
DIM A(12,10)
the values recalled would be out of order.
However, if the recalled array was dimensioned as,
DIM A(10,12)
the recalled values would be in the correct order with zeros
stored
in the extra array elements.
If the recalled array is dimensioned with the same number of
elements as the stored array but with different dimensions, any
of the following error messages or error conditions could result:
ERR
Extra zero values
in the recalled array
OUT OF MEMORY ERROR
Data
out of order
in the array
The user
is not prompted with cassette operating instructions
during the execution of either STORE or RECALL. It is a good
programming practice to precede STORE and RECALL state-
ments
with PRINT statement prompts instructing the operator to
press the proper cassette recorder keys.