Apple IIe - Page 200

200
Apple
lie
Use
rs
Handbook
Step 2: Edit
the
greetings program
so
that
the
initial
message
displayed
by that program indicates that the diskette
is
a
master. Then, save* the edited greetings program on
the
slave
diskette.
Step
3:
If
you
plan
on changing
the
name
of
the
greetings
program
(see
the
prompt
on
the
display
in Step
5)
, use*
RENAME
at
this
point
to
change
the
program's name.
Step 4: Remove the
slave
diskette and replace
it
with
the System
Master.
Step 5: Boot
DOS
from
the
System Master and
enter
the
fol
low-
ing command
from
either
Applesoft
or
Integer:
BRUN MASTER
CREA
TE
The
following
screen display
will
then appear:
DOS
3.3 MASTER-CREATE UTILITY
COPYRIGHT
1980
BY
APPLE
COMPUTER INC.
ALL
RIGHTS
RESERVED
(NOW
LOADING
DOS
IMAGE)
PLEASE
INPUT
THE
GREETING
PROGRAM'S
FILE
NAME:
Step 6: Enter the program name used
for
the
greetings program
on
the
slave
diskette
(generally HELLO)
and press
the
return key. The
following
screen
will
then appear:
*The
procedure
for
saving programs and renaming files
will
be
discussed
later
in this chapter.