Apple IIe - Page 201

Cassette and Disk Storage with the Apple lie 201
REMEMBER THAT MASTER DOES NOT CREATE
THE GREETINGS PROGRAM, OR PLACE IT IN THE
DISK DIRECTORY
THIS IS THE FILE NAME THAT WILL BE PLACED
WITHIN THE IMAGE:
HELLO
PLACE THE DISKETTE TO BE MASTERED IN THE
DISK DRIVE.
PRESS RETURN WHEN READY.
NOTE : IF YOU WANT A DIFFERENT FILE NAME ,
PRESS ESC .
Step 7: Remove
your System Master from the drive and
replace
it with the slave diskette being converted to a
master.
Press the return key to begin the conversion .
The
following message will be displayed when the con-
version has been completed:
THE DISKETTE HAS BEEN UPDATED , YOU MAY
REMOVE IT AT THIS TIME .
IF YOU WISH TO " MASTER" ANOTHER DISK-
ETTE , PRESS (RETURN)
OTHERWISE PRESS ESC TO EXIT "MASTER"
Step 8:
After you have finished using MASTER CREA TE, reboot
DOS before entering any further commands.
The greetings
program filename (specified in Step 5) is not
actually placed in the diskette's catalog. This prompt merely
identifies the program that DOS should run when the diskette is
booted .
The
newly created master diskette must contain a program with
the filename specified in Step 5. If this is not the case, the
following message will be displayed when you boot the diskette: