Mac Pro (Early 2008) Take Apart — Memory Cage with Rear Fan 62
Memory Cage with Rear Fan
Tools
The only tools required for this procedure are a long-handled, magnetized #1 Phillips screwdriver
and a short-handled, magnetized jeweler’s #1 Phillips screwdriver or right-angle, magnetized #1
Phillips screwdriver.
Preliminary Steps
Before you begin, open the computer, lay it on its side with the access side facing up, and remove
the following:
PCI Express card installed in slot • 1
Any 12-inch PCI Express card• s
Processor heatsink cove• r
Top and bottom memory card• s
Part Location
To Next Page
Loading...
