Take Apart Hard Drive, Ultra2 LVD SCSI - 67
this cable has a built-in
terminator so you don’t need
to add one. You can connect
external Ultra2 LVD SCSI
devices to the port on the
rear of the computer.
If the computer came with
one Ultra2 LVD SCSI drive,
it’s installed in drive bay 1,
near the front of the
computer. If it came with
two drives, the second one is
installed in bay 2. If a third
drive is installed, it’s in bay
3. Usually the computer
uses the drive in bay 1 to
start up.
To Next Page
Loading...
