Adjustments Diagnostic Adjustments - 27
2 Open the USB Display Service Utility (USB DSU).
3 To download parameters from the CRT/video board, click
Create File. A message appears explaining that the
process will take about 30 seconds.
4 When the message disappears, a new file called
Parameter Settings MBY is created on the same level as
the USB Display Service Utility application.
Caution:
To avoid loss of data, do not move or rename the
Parameter Settings MBY file.
Duplicate the Parameter Settings File
1 Locate the Parameter Settings MBY file, but do not move
or rename it.
2 Beside the Parameter Settings MBY file create a new
folder.
To Next Page
