Apple Thunderbolt - Setting Up Your Display

6 English
SettingUpYourDisplay
Follow these steps to set up your Apple Thunderbolt Display:
1 Remove the protective lm from the display and cables.
2 Insert the power cord into the display, and then insert the AC plug into a grounded
power outlet.
3 Connect the Thunderbolt cable to your computer’s Thunderbolt port.
Apple Thunderbolt Display
MacBook Pro
MagSafe
power port
Grounded
power outlet
Thunderbolt
port
4 If you’re connecting to a MacBook Pro, plug the MagSafe connector into the MagSafe
power port on your MacBook Pro to power it and charge its battery.
5 If your computer is turned o, press the power (®) button on your computer to start it
up. The display turns on automatically when you start up your computer.