Need help?Do you have a question about the Approx appPRO2V2 and is the answer not in the manual?
Lists all items included in the repeater's packaging for user verification.
Identifies and describes the function of the repeater's LEDs, buttons, and ports.
Outlines the three primary modes for installing and configuring the repeater: Repeater, Access Point, and Client.
Detailed instructions for configuring the repeater wirelessly via its web interface.
Guide to configure the repeater using a wired RJ-45 connection to the router.
Instructions for setting up the device in Access Point mode.
Steps to configure the device for repeater functionality using the wizard interface.
Details on selecting the wireless network and entering the security key for repeater mode.
Steps to configure the device in client mode using the wizard interface.
Guidance on how to connect client devices to the repeater after configuration.
Steps for using WPS to connect the repeater and wireless adapter.
How to connect the repeater in client mode using an RJ-45 cable.
To Next Page
General