EasyManuals Logo

APRAMO ALL STAGE Series User Manual

APRAMO ALL STAGE Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Remove the webbing (40) from the joint plate (32).
Place the joint plate (32) under the clip (33) shown in the
cover.
Press down on the central adjuster (04), and pull the
shoulder straps towards you (05), extending the 5-point
harness as far as it will go. DO NOT pull on the shoulder
pads (06).
Pull the adjusting ring (07) upwards, whilst pushing the
headrest (08) downwards to its lowest position.
Unlatch the rear cover (31).
16
17
35
36
37
REARWARD FACING
GROUP 0+/I
31
06
05
19
04
16
07
08
17
35
32
33
37
Press the ISOFIX release buttons to release the ISOFIX connectors, push the ISOFIX
connectors back into the base of the child restraint.
Press the release button of the Top Tether adjuster B (47) to release the strap and unlock
the snap hook (18) from the vehicle anchorage point.
Remove the child car seat from the vehicle seat.
Release the buckle tongue from the vehicle seat buckle. Unthread 3-point vehicle belt
from the child car seat and allow it to retract.
Press the ISOFIX release buttons to release the ISOFIX connectors, push the ISOFIX
connectors back into the base of the child restraint.
Press the release button of the Top Tether adjuster B (47) to release the strap and unlock
the snap hook (18) from the vehicle anchorage point.
Remove the child car seat from the vehicle seat.
32
40
36
4. Removal of the Child Car Seat
4.1 ISOFIX + Top Tether (Apramo
®
Dual Tether™)
4.2 3-point vehicle belt + ISOFIX connectors + Top Tether (Apramo
®
Dual Tether™)
1)
1)
2)
4)
3)
5)
1)
2)
3)
4)
2)
3)
5. Removal and installation of the 5-point harness
Turn the child car seat around so that the rear is facing you.
GB 22
GB 02
GB 23
Pull out the shoulder belts (05) and shoulder pads (06)
from the headrest slots (36) in front of the headrest.
Open the buckle (19) of the 5-point harness.
Unfasten the fabric cover (37) and place the buckle
latches into the child car seat back on each side, and
then refasten the fabric cover (37).
Turn the metal plate (38) to be vertical and remove from
the housing (39), remove the 5-point harness buckle (19).
Remove the loops of the shoulder pads (34) from the
headrest lever (35).
Put the rear cover back (31).
38
39
40
41
42
6)
8)
9)
10)
11)
7)
35
34
38
36
06
05
39
39
42
37
41
19
40
Turn the child car seat around so that the front is facing you.
5.1 Removal of the 5-point harness

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRAMO ALL STAGE Series and is the answer not in the manual?

APRAMO ALL STAGE Series Specifications

General IconGeneral
BrandAPRAMO
ModelALL STAGE Series
CategoryBaby & Toddler Furniture
LanguageEnglish

Related product manuals