For your child’s safety, ensure that the following checks are
carried out before every journey:
• The vehicle belt is passed through both of the belt guide
rings.
• The vehicle seat belt is taut, remove any slack if necessary
and is not twisted.
• The seat is placed up against the back of the vehicle seat,
without a gap.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
5. Forward Facing Installaon
5.1 Group I (9 - 18 KG approx.)
5.1.1 With 5-point harness + ISOFIX + Top tether
1. Set up the ISOFIX fittings. (See section 3.1)
2. Ensure that the 5-point harness is correctly installed. (Refer
to section 8)
3. Ensure that the 5-point harness is correctly adjusted. (Refer
to section 3.2)
4. Adjust the seat to the desired recline position (See section
3.4) and ensure that the recline mechanism is securely locked.
5. Rotate the seat to the forward facing position (See section
3.5) and ensure that the rotation mechanism is securely locked.
6. Place the child car seat on the vehicle seat facing the front
of the vehicle (In the direction of travel). (fig. 27)
08
To Next Page
Loading...
Need help?
General
