Apricorn Aegis Max User Manual

Quick Start Guide
Attention: Use only the included cables with your Aegis Max. You might
damage the drive if you use a cable not included with the Aegis Max.
In the rare case that the Aegis Max
does not power up on a single
USB connection, the included USB
Y-cable may be required (pictured
right). Simply plug the two Y-cable
USB connectors (black and grey
connectors) into the two USB ports
on your notebook, connect the
Aegis Max, and the drive will power.
Powering the Aegis Max
using the USB Y-cable
Package contents
Aegis Max•
Travel pouch•
USB Power Cable•
Quick Install
Aegis Max
USB Y-Cable•
Software CD•
Ensure your computer’s power is turned on.1.
Plug the Aegis Max cable into a USB port on your computer.2.
The 3. New Hardware Foundmessagemayappearbrieyonyourcomputerscreen.
The Aegis Max drive icon will appear in 4. My Computer for Windows or on the
Desktop for Mac.
Your new Aegis Max is now 5.
ready for use.

Apricorn Aegis Max Specifications

General

Operating System Compatibility	Windows, macOS, Linux
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Encryption	AES-XTS 256-bit hardware encryption
Durability	IP68 rated for dust and water resistance
Compliance	FIPS 140-2 Level 3
Authentication	PIN access
Operating Temperature	32°F to 122°F (0°C to 50°C)
Interface	USB 3.2 Gen 1 (USB 3.0)