Need help?Do you have a question about the Apricorn Aegis Padlock and is the answer not in the manual?
General| Type | HDD |
|---|---|
| HDD size | 3.5 \ |
| HDD speed | - RPM |
| HDD capacity | 64 GB |
| Storage drive buffer size | 8 MB |
| USB version | 2.0 |
| Ethernet LAN | No |
| USB connector | USB |
| USB data transfer rates | 480 Mbit/s |
| USB 2.0 ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) ports quantity | 0 |
| Certification | FC CE |
| Product color | Gray |
| Windows operating systems supported | Yes |
| Operating temperature (T-T) | -40 - 70 °C |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 84.5 mm |
| Height | 19 mm |
| Weight | 176 g |
Lists items included in the Aegis Padlock SSD package.
Information to review before using the Aegis Padlock SSD.
Instructions for connecting the Aegis Padlock SSD to a computer.
Steps to connect using the USB Y-cable if single connection fails.
Guide for initial setup and setting the Admin PIN.
Procedure for unlocking the Aegis Padlock SSD.
How to enter and exit Admin Mode for drive configuration.
Steps to modify the existing Admin PIN.
Creating a User PIN via Admin Mode.
User-initiated PIN creation process.
How a user can change their own PIN.
How to use a recovery PIN to regain access.
Admin procedure to set drive to Read-Only mode.
Admin procedure to revert drive to Read/Write mode.
User procedure to set drive to Read-Only mode.
User procedure to revert drive to Read/Write mode.
Configure the minimum length for new PINs.
Configure automatic drive locking after inactivity.
Enable mode to prevent automatic locking during reboots.
Disable Lock-Override mode and restore normal operation.
Explains brute force attacks and drive protection mechanisms.
Steps to initialize and format after a full reset.
Instructions for reformatting the drive for Mac compatibility.
Information on drive self-diagnostics and error patterns.
Steps to recover access if the User PIN is forgotten.
Steps to recover access if the Admin PIN is forgotten.
Reasons for the operating system not recognizing the drive post-reset.
Explanation for the RED LED blinking and inability to enter code.
Meaning of the initial LED color sequence during self-test.
Information on expected data transfer speeds for the drive.
Methods to recover data when a PIN is forgotten.
Reasons for errors encountered when attempting to change the PIN.
Key combinations for operations in standby mode.
Key combinations for operations in user mode.
Key combinations for operations in admin mode.
Details on product warranty and return procedures.
To Next Page
