30
use and maintenance Pegaso 650
-
#/.42/,3
NOTE The electrical components function only when the igni-
tion switch (A) is in the “n” (ON) position.
The parking lights are illuminated besides when the ignition
switch (A) is in the “
Y” (PARKING) position.
#/.42/,3!44(%,%&4(!.$'2)0
1) HORN PUSH BUTTON ( f )
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
c )
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (
b - a )
When the lever is in the position indicated by the “
b”, the
parking lights, dashboard light and low beam are on.
When the lever is moved to the “
a” , the high beam is illumi-
nated, the dashboard and parking lights remain on.
4) HIGH BEAM SIGNALING PUSH BUTTON (
a )
Depress the button momentarily to flash the high beam for
signaling when passing, etc. and in the event you need
someone’s attention in an emergency.
5) COLD START LEVER (
e)
Operate the cold start (choke) by rotating the lever down-
wards.
To disengage the cold start, return the lever upwards to its ini-
tial position.
Usa-01.fm Page 30 Wednesday, December 15, 1999 9:31 AM
To Next Page
Loading...
Need help?
General
