EasyManua.ls Logo

APRILIA PEGASO 650 IE - PART2 02-2001 User Manual

APRILIA PEGASO 650 IE - PART2 02-2001
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
55
use and maintenance Pegaso 650 I.E.
-!).4%.!.#%
Carefully read p. 2 (SAFETY WARN-
INGS), (TECHNICAL INFORMATION)
and (WARNINGS - PRECAUTIONS -
GENERAL ADVICE).
aWARNING
Risk of fire.
Keep fuel and other flammable sub-
stances away from the electrical com-
ponents.
Before beginning any maintenance op-
eration or any inspection of the vehicle,
stop the engine, extract the key from
the ignition block, wait until the engine
and the exhaust system have cooled
down and if possible lift the vehicle by
means of the proper equipment, on firm
and flat ground.
aWARNING
Before proceeding, make sure that the
room in which you are working is prop-
erly ventilated.
Keep away from the red-hot parts of the
engine and of the exhaust system, in or-
der to avoid burns.
Do not hold any mechanical piece or
other parts of the vehicle with your
mouth: the components are not edible
and some of them are noxious or even
toxic.
aCAUTION
If not expressly indicated otherwise, for
the reassembly of the units repeat the
disassembly operations in reverse or-
der.
In case any maintenance operation
should be required, it is advisable to
use latex gloves.
Routine maintenance operations can usu-
ally be carried out by the user, but some-
times specific tools and specific technical
skills may be required.
In case periodic maintenance operations,
assistance or technical advice are needed,
contact an aprilia Official Dealer, who will
ensure you prompt and accurate servicing.
Ask your aprilia Official Dealer to test the
vehicle on the road after a repair or period-
ic maintenance operation.
In any case, personally carry out the “Pre-
liminary checking operations” after any
maintenance operation, see p. 43 (PRE-
LIMINARY CHECKING OPERATIONS).
Question and Answer IconNeed help?

Do you have a question about the APRILIA PEGASO 650 IE - PART2 02-2001 and is the answer not in the manual?

APRILIA PEGASO 650 IE - PART2 02-2001 Specifications

General IconGeneral
BrandAPRILIA
ModelPEGASO 650 IE - PART2 02-2001
CategoryMotorcycle
LanguageEnglish

Summary

MAINTENANCE

General Safety Warnings

Essential safety precautions before performing any maintenance or inspection.

REGULAR SERVICE INTERVALS CHART

OPERATIONS BY APRILIA OFFICIAL DEALER

IDENTIFICATION DATA

Frame & Engine Numbers

Location and importance of vehicle frame and engine identification numbers.

ENGINE OIL LEVEL CHECK & TOPPING UP

ENGINE OIL & FILTER CHANGE

Engine Oil Filter Replacement

Procedure for changing the engine oil filter.

Cleaning Oil Filter on Tank

Instructions for cleaning the engine oil filter located on the fuel tank.

AIR CLEANER MAINTENANCE

Air Cleaner Removal & Partial Cleaning

Steps for removing and cleaning the air filter element.

Air Cleaner Replacement

Procedure for installing a new air filter.

FRONT WHEEL SERVICE

Front Wheel Disassembly

Step-by-step guide to removing the front wheel.

Front Wheel Reassembly

Step-by-step guide to reinstalling the front wheel.

REAR WHEEL SERVICE

Rear Wheel Disassembly

Step-by-step guide to removing the rear wheel.

Rear Wheel Reassembly

Step-by-step guide to reinstalling the rear wheel.

VEHICLE SUPPORT STANDS

Rear & Front Support Stand Usage

Instructions for correctly positioning the vehicle on support stands.

DRIVE CHAIN MAINTENANCE

Drive Chain Slack Check & Adjustment

How to check and adjust the drive chain tension.

Drive Chain Wear & Lubrication

Checking chain wear and performing cleaning/lubrication.

FUEL TANK REMOVAL

VEHICLE PANEL & GUARD REMOVAL

Oil Sump Guard Removal

Procedure for removing the oil sump guard.

Side Panel Removal

Steps to remove the vehicle's side panels.

DRIVE CHAIN GUARD REMOVAL

SIDE BAG SUPPORT INSTALLATION

REAR CASE SUPPORT INSTALLATION

STEERING & SUSPENSION CHECKS

Steering & Fork Checks

Procedures for checking steering and front fork operation.

Suspension Inspection

Visual inspection of front and rear suspension components.

REAR SUSPENSION ADJUSTMENT

Adjusting Rear Shock Absorber

Guide to adjusting the rear shock absorber settings.

BRAKE PAD WEAR CHECK

ENGINE IDLING & THROTTLE CONTROL

Idling Speed Adjustment

How to adjust the engine's idle speed.

Accelerator Control Adjustment

Adjusting the throttle grip's free play.

COLD START CONTROL ADJUSTMENT

REAR-VIEW MIRRORS

Rear-View Mirror Removal & Adjustment

Procedures for removing and adjusting the rear-view mirrors.

SPARK PLUG SERVICE

Spark Plug Removal & Check

Steps to remove, inspect, and clean the spark plug.

Spark Plug Installation

Proper procedure for installing a new spark plug.

VEHICLE STAND CHECK

Side & Center Stand Checks

Verifying the proper function and condition of the side and center stands.

BATTERY SERVICE

Battery Electrolyte & Terminal Checks

Checking electrolyte level and cleaning battery terminals.

Battery Removal

Step-by-step guide for safely removing the battery.

Battery Recharging & Installation

Procedures for recharging and reinstalling the battery.

BATTERY INACTIVITY & SWITCH CHECKS

Long Battery Inactivity Precautions

Steps to take when the vehicle is stored for extended periods.

Electrical Switch Checks

Verifying the function of various electrical switches.

FUSE SERVICE

Fuse Arrangement & Replacement

Locating fuses and procedures for replacement.

HEADLIGHT & DASHBOARD LIGHTING

Headlight Beam Adjustment

Adjusting the vertical aim of the headlight beam.

BULB REPLACEMENT

Headlight Bulb Replacement

Guide for changing headlight bulbs.

High Beam, Parking & Low Beam Bulb Replacement

Procedures for replacing specific headlight bulbs.

DIRECTION INDICATOR BULB REPLACEMENT

Front & Rear Indicator Bulb Replacement

Steps for replacing front and rear turn signal bulbs.

REAR LIGHT & NUMBER PLATE BULB REPLACEMENT

Rear Light Bulb Replacement

Procedure for changing the rear tail/stop light bulb.

Number Plate Bulb Replacement

Procedure for changing the license plate light bulb.

VEHICLE TRANSPORT & CLEANING

Vehicle Transport Guidelines

Precautions for transporting the vehicle safely.

Vehicle Cleaning Procedures

Recommended methods for cleaning the vehicle.

VEHICLE INACTIVITY PRECAUTIONS

Long Periods of Inactivity

Steps for preparing the vehicle for storage.

After Period of Inactivity

Steps to take after the vehicle has been stored.

TECHNICAL DATA

Dimensions & Engine Specifications

Key physical dimensions and engine details.

Transmission, Capacity & Other Specs

Data on transmission, fluid capacities, and other technical details.

Gear Ratios, Drive Chain, Fuel System & Frame

Technical specifications for drivetrain, fuel, and frame.

Suspensions, Brakes, Wheels & Tyres

Technical specifications for suspension, brakes, wheels, and tyres.

Tyre, Ignition, Spark Plug & Electrical System Specs

Technical details for tyres, ignition, spark plugs, and electrical systems.

Bulb & Warning Light Specifications

Specifications for vehicle bulbs and warning lights.

LUBRICANT CHART

APRILIA IMPORTERS

WIRING DIAGRAM

WIRING DIAGRAM KEY

Related product manuals