APRILIA PEGASO 650 IE - PART2 02-2001 User Manual

96
use and maintenance Pegaso 650 I.E.
#(!.').'4(%&2/.4
$)2%#4)/.).$)#!4/2"5,"3
Carefully read p. 94 (BULBS).
◆ Position the vehicle on the stand, see p.
52 (POSITIONING THE VEHICLE ON
THE STAND).
◆ Unscrew and remove the two screws (1).
◆ Remove the protection screen (2).
aCAUTION
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (1) moderately and carefully,
to avoid damaging the protection
screen.
◆ Press the bulb (3) slightly and rotate it
anticlockwise.
◆ Extract the bulb (3) from its seat.
aCAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
◆ Correctly install a new bulb of the same
type.
#(!.').'4(%2%!2$)2%#4)/.
).$)#!4/2"5,"3
Carefully read p. 94 (BULBS).
◆ Position the vehicle on the stand, see p.
52 (POSITIONING THE VEHICLE ON
THE STAND).
◆ Unscrew and remove the screw (4).
aCAUTION
While removing the protection screen,
proceed carefully in order not to break
the cog.
◆ Remove the protection screen (5).
aCAUTION
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (4) moderately and carefully,
to avoid damaging the protection
screen.
◆ Press the bulb (6) slightly and rotate it
anticlockwise.
◆ Extract the bulb (6) from its seat.
aCAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
◆ Correctly install a new bulb of the same
type.
aCAUTION
If the bulb socket (7) goes out of its
seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.

APRILIA PEGASO 650 IE - PART2 02-2001 Specifications

General

Brand	APRILIA
Model	PEGASO 650 IE - PART2 02-2001
Category	Motorcycle
Language	English