Need help?Do you have a question about the APRILIA RSV 1000 TUONO R and is the answer not in the manual?
General| Engine Type | V-twin, four-stroke |
|---|---|
| Displacement | 998 cc |
| Transmission | 6-speed |
| Maximum Power | 139 hp (104 kW) @ 9, 500 rpm |
| Maximum Torque | 74.5 lb-ft @ 7250 rpm |
| Dry Weight | 185 kg |
| Seat Height | 820 mm |
| Fuel Capacity | 18 liters |
| Frame | Aluminum alloy |
| Front Suspension | Upside-down fork, adjustable |
| Rear Suspension | Monoshock, adjustable |
| Front Brakes | 2 x 320 mm discs, Brembo four-piston radial calipers |
| Rear Brakes | 220mm disc, 2-piston caliper |
Explains the symbol for potential personal injury and risks.
Explains WARNING (injury/death) and CAUTION (minor injury/damage).
Read manual, know vehicle, ensure good condition.
Identifies revolution counter, warning lights, and digital display.
Engine stop switch and starter button functions.
Warnings about fuel flammability and refueling procedures.
Procedure for checking and topping up front brake fluid.
Procedure for checking and topping up rear brake fluid.
Procedure for checking and topping up clutch fluid.
Check coolant level, do not ride below minimum.
Coolant is toxic, avoid ingestion, skin contact, hot engine parts.
Check coolant level in expansion tank with cold engine.
Inspect tyre surface, wear indicators, and replace when worn.
Check level periodically, warning for low pressure.
Steps for changing engine oil and filter.
Essential for safe operation and to prevent injuries/damage.
Steps to start the engine safely.
Familiarize gradually, check fuel, engage first gear smoothly.
Avoid sudden braking, use both brakes for deceleration.
Essential for engine life, follow speed/rpm recommendations.
Release throttle, apply brakes, downshift, pull clutch.
Safety rules before starting any maintenance operation.
Procedure for checking and topping up engine oil level.
Steps for changing engine oil and filter.
Procedure for checking, cleaning, and replacing the air filter.
Instructions for removing and refitting the front wheel.
Steps to remove the front brake callipers.
Steps to reassemble the front brake callipers.
Steps to remove the rear wheel.
Procedures for removing and refitting the final drive.
Steps to lift and support the fuel tank.
Adjusting rebound damping, compression damping, and spring preload.
Adjusting spring preload and rebound damping.
Visual check of brake pads for wear before each trip.
Adjusting idle stroke of the throttle grip.
Procedures for checking, cleaning, and replacing spark plugs.
Steps for charging the battery using a charger.
How to check and replace fuses.
Procedure for replacing headlight bulbs.
Disconnect fuses/battery, store properly.
Specifies engine and fork oil types and alternatives.
Benefits of trained technicians and genuine parts.
To Next Page