What to do if the ignition system malfunctioning and the message '???' fails to reappear on my APRILIA RSV MILLE Motorcycle?
If the ignition system is malfunctioning and the message '???' fails to reappear, it might be due to breaks in the cables or improperly made connections. Ensure there are no breaks in the white/purple (Bi/Vi) cable between the electronic unit and the display.
Why is there a fault with the ignition coil '1' of the front cylinder in my APRILIA Motorcycle?
If you are experiencing a fault with the ignition coil '1' of the front cylinder on your APRILIA Motorcycle, it could be due to a faulty ignition coil or disconnected wiring. Check the connector and ignition cable.
What to do if the ignition system malfunctioning and the message '???' reappears on my APRILIA RSV MILLE Motorcycle?
If the ignition system is malfunctioning and the message '???' reappears on your APRILIA Motorcycle, do not start the vehicle to avoid secondary damage.
General| Displacement | 998 cc |
|---|---|
| Compression Ratio | 11.4:1 |
| Fuel system | Electronic fuel injection |
| Transmission | 6-speed |
| Front tire | 120/70 ZR 17 |
| Rear tire | 180/55 ZR 17 |
| Engine type | V-twin, 4-stroke |
| Cooling system | Liquid cooled |
| Ignition | Electronic |
| Max Power | 128 hp (95.5 kW) @ 9500 rpm |
| Front suspension | Upside-down telescopic fork |
| Front brakes | Dual 320 mm discs, 4-piston calipers |
| Rear brakes | 220mm disc, Brembo 2-piston caliper |
| Fuel capacity | 18 L (4.8 US gal) |
Information on manual updates and release lists.
Explanation of manual consultation conventions and symbols.
Explains warning symbols and precautionary measures for safe operations.
Advice on consulting the manual, terms, and version symbols.
Guidelines for using various vehicle fluids and components.
Detailed technical specifications for dimensions and engine.
Recommended lubricants and greases for various parts.
Lists special tools required for assembly and maintenance.
Details the regular service intervals chart and maintenance recommendations.
Covers battery checks, recharging, and maintenance.
Procedures for cleaning and replacing the air cleaner element.
Procedures for checking and topping up engine oil.
Provides technical data, maintenance intervals, troubleshooting, and specifications.
Procedures for removing the entire engine assembly from the motorcycle frame.
Details the process for disassembling the engine.
Checks and bleeding procedures after engine reassembly.
Information on the fuel tank, its components, and maintenance.
Steps for removing the entire fuel supply pump assembly.
Overview of the engine management system, sensors, and ECU.
Information on throttle body components, removal, and adjustment.
Procedure for removing the radiator assembly.
Steps for removing the cooling electrofans.
Procedure for removing the thermal expansion valve.
Procedure for removing the expansion tank.
Diagram showing the location of electrical components.
Troubleshooting and checks for ignition system components.
Checks and troubleshooting for the fuel pump and its relay.
Covers battery activation, maintenance, and checking.
Procedures for removing various body panels, seats, fuel tank, and related components.
Checking and removing the front wheel and its bearings.
Checking and removing the rear wheel and drive unit.
Procedures for checking and changing front brake pads and discs.
Lists common engine, electric, battery, brake, and chassis problems and their remedies.
Details routing and identification of various vehicle pipes and cables.
Troubleshooting steps for electrical system faults based on display codes.
Provides detailed technical data for various vehicle systems.
To Next Page